|
The instrument TM510FN is a type of portable measuring gauge, capable of measuring rapidly, nondestructively, and precisely the thickness of coating and cladding material. It is suitable for on site as well as for laboratory uses. Via the using of different probes, many sorts of measuring can be satisfied by the gauge. It can be applied comprehensively to manufacturing, metal processing and chemical profession as well as to commercial inspection. It is indispensable for the major of materials protection.
Features:
- Two thickness measuring methods adopted, the gauge can be applied to thickness measuring of non-magnetic coating on magnetic metal substrate as well as non-conductive coating on non-magnetic metal substrate;
- 5 types of probes can be used (F400, F1, F10, N1, CN02,);
- 2 measuring modes are available: continuing measuring mode (CONTINUE) and single measuring mode (SINGLE);
- 2 operation modes are available: direct mode (DIRECT) and batch mode (A-B);
- 5 statistic values：mean value（MEAN）, max. value（MAX）, min. value (MIN), numbers of measuring (NO), standard deviation (S．DEV)
- 2 methods can be used to calibrate the gauge, and the system error of the probe can be corrected by use of basic calibrating method;
- Storage function: 495 measuring values can be stored;
- Deletion function: delete the single questionable data occurring in measuring, as well as all of the data in memory area to perform the new measuring;
- Limit can be set: capable of alarming automatically for measuring values out of limit; and a batch of measuring values can be analyzed via histogram;
- Printing function: measuring value, statistic value, limit and histogram can be printed;
- Capable of communication with PC: measuring values and statistic values can be sent to PC to perform the further process for data;
- Indication of low voltage;
- Buzzing indication in the course of operation;
- With the function of error warning, error warning can be carried out through display or buzzing;
- Two shut down modes are available: manual shut down mode and automatic shut down mode;
| Measuring range |
0-1500µ with standard probe F1.N1 (10.000mm max) |
| Probes available |
5 probes available for F (ferrous: on steel/iron) and N (non-ferrous metals) |
| Tolerance |
F1:±(1µ+3%H) N1.±(1.5µ+3% H)
H: actual thickness tested |
| Resolution |
Alphanumeric with 4 large digits |
| Operation language |
English |
| Standards |
DIN, ISO, ASTM,BS |
| Min. measuring area |
F1:(standard probe) |
| Min. curvature radius |
convex:3mm, concave:50mm |
Min. substrate
thickness |
type F: 0.5mm, type N: 50mm |
| Calibration |
Zero and foil calibration |
| Statistics |
Number of measurements, mean, standard deviation,
maximum and minimum of 3000readings |
| Data memory |
500 measuring data |
| Limits |
Adjustable with acoustic alarm |
| Interface |
USB 2.0 |
| Operating temperature |
0-40℃ |
| power supply |
AA size 1.5V |
| Dimensions |
152×84×34mm (main unit) |
| Weight |
345.g |
Standard
- Main unit
- Probe F1 or N1 or both (depending from configuration)
- 5 Calibration foils
- Instruction manual
- Certificate
- Warranty card
- Carrying case
- Communication cable
- PC software Dataview
Optional
- 5 probes for different applications
- Calibration foils in various thickness
Type F probe ：
Probe |
F400 |
F1 |
F1/90° |
F10 |
| Measuring Principle |
Magnetic method |
| Measuring range(mm) |
0～400 |
0～1250 |
0～10000 |
| Min resolution(mm) |
0.1 |
0.1 |
10 |
| Tolerance |
One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1) |
±(2%H+10) |
| Two-point calibration (mm) |
±(1%H+0.7) |
±((1%H+1) |
±(1%H+10) |
| Minimum radius of curvature (convex) (mm) |
1 |
1.5 |
flat |
10 |
| Minimum measuring area(mm) |
F3 |
F7 |
F7 |
F40 |
| Minimum thickness of base material(mm) |
0.2 |
0.5 |
0.5 |
2 |
Type N probe ：
Probe |
N400 |
N1 |
CN02 |
| Measuring Principle |
Eddy current method |
| Measuring range (mm) |
0～400 |
0～1250 |
10～200 |
| Min resolution(mm) |
0.1 |
0.1 |
1 |
| Tolerance |
One-point calibration (mm) |
±(2%H+0.7) |
±(2%H+1.5) |
±(2%H+1) |
| Two-point calibration (mm) |
±(1%H+0.7) |
±（1%H+1.5） |
-------- |
| Minimum radius of curvature (convex) (mm) |
1.5 |
3 |
flat |
| Minimum measuring area(mm) |
F4 |
F5 |
F7 |
| Minimum thickness of base material(mm) |
0.3 |
0.3 |
0 |
Note：H——Measured Value
|
